Below is a small sample of the range of fixings offered by IC Fixings. If however you do not see a product that is required by your client then please send a drawing or photograph of your requirement so we may quote. Or contact us on 0121 525 2252.
| THROUGHBOLT |  |
RANGE: M6 - M24 BZP RANGE: M6 - M24 ST-ST RANGE: M6 - M24 GALV |
| RAWLBOLT |  |
RANGE: M6 - M24 LOOSE BOLT RANGE: M6 - M24 BOLT PROJECTING |
| SLEEVE ANCHOR |  |
RANGE: 6mm - 20mm HOLE SIZE BZP RANGE: 6mm - 12mm HOLE SIZE ST-ST |
|
CHEMICAL ANCHOR CAPSULES |
 |
SPIN IN RANGE: 8mm - 30mm HAMMER IN RANGE: 8mm - 30mm FLEXIBLE RANGE: 8mm - 39mm |
| PUMP IN RESIN |  |
EPOXY ACRYLATE / POLYESTER STYRENE FREE / CERAMIC VINYLESTER |
|
SPECIAL CHEMICAL ANCHOR STUDS |
 |
RANGE: M6 - M56 S/C & BZP RANGE: M6 - M36 GALV RANGE: M6 - M24 ST.ST |
| HEAVY DUTY ANCHORS |  |
RANGE: M8 - M24 |
| UNDERCUT ANCHORS |  |
RANGE: M10 - M20 |
| PLASTERBOARD FIXINGS |  |
SELF DRILL / TAP IN SPRING TOGGLE / INTERSET TYPE |
| GENERAL FIXINGS |  |
PLASTIC PLUGS / NYLON PLUGS RUBBER WITH INTERNAL NUT NYLON WITH INTERNAL NUT SELF TAPPING ANCHORS ALUMINIUM EXPANSION PLUGS |
| WEDGE ANCHORS |  |
RANGE: M6 - M20 BZP / ST.ST |
| FRAME/HAMMER IN FIXING |  |
RANGE: 4mm - 8mm HAMMER IN RANGE: 8mm - 10mm FRAME RANGE: 8mm - 10mm UPVC |
| DRILL BITS |  |
STRAIGHT SHANK /
"K" TAPER SDS+ / SDS MAX SPLINE SHANK / CORE BITS |
| MACHINE STUD |  |
RANGE: ANY LENGTH, ANY DIAMETER, ANY MATERIAL (H.T. B7 MILD STEEL) ANY COATING |
| GUNS |  |
300ml 380ml 360ml 500ml |
| TEK SCREWS |  |
HEX HD, LOW PROFILE, WAFER HEAD, CSK HEAD |
| SCAFFOLD RING BOLTS |  |
CLICK HERE for data sheet |
| NUTS and BOLTS |  |
CLICK HERE for data sheet |
| SITE CONSUMABLES |  |
MOP, BUCKET, BROOM, PERSONAL SAFETY EQUIPMENT, WIPERS, TARPAULINS, WHEELBARROWS, GLOVES |